43
Chapter 3: Maintenance and Component Installation
DIMM Installation
1. Insert the desired number of DIMM modules based on the recommended DIMM
population table on page 40.
2. Align the DIMM module key with the receptive point on the single-latch DIMM slot.
Receptive Point
Release Tab
Notch
Push both ends straight
down into the memory slot.
3. Push the release tab outwards to unlock the slot.
4. Press both ends of the module straight down into the slot until the module snaps into
place.
5. Push the release tab to the lock position to secure the module into the slot.
DIMM Removal
Reverse the steps above to remove the DIMM modules from the motherboard.
