10
SuperServer 6029TR-DTR User's Manual
Figure 1-1. Control Panel View
1.4 Server Chassis Features
Control Panel
The switches and LEDs located on the control panel are described below. See Chapter 4 for
details on the control panel connections.
Information LED
Feature
Description
Continuously on and red An overheat condition has occurred. (This may be caused by cable congestion.)
Blinking red (1 Hz)
Fan failure: check for an inoperative fan.
Blinking red (0.25 Hz)
Power failure: check for an inoperative power supply.
Solid blue
Local UID has been activated. Use this function to locate the server in a rack
environment.
Blinking blue (300 msec) Remote UID has been activated. Use this function to locate the server from a remote
location.
1
4
3
2
Control Panel Features
Item
Feature
Description
1
Power Button
The main power button is used to apply or remove power from the
power supply to the server. Turning off system power with this button
removes the main power but maintains standby power. To perform many
maintenance tasks, you must also unplug system before servicing.
2
NIC LED
Indicates network activity on LAN port when flashing.
3
Information LED
See the following table for the status shown by this LED.
4
UID Button/LED
The unit identification (UID) button turns on or off the blue light function
of the Information LED and a blue LED on the rear of the chassis.
These are used to locate the server in large racks and server banks.
