SuperServer SYS-5039MC-H8TRF User's Manual
40
Checking the Temperature of an NVMe M.2 Drive
Checking an NVMe M.2 drive using IPMI
•
IPMI > Server Health > Sensor Reading > M2NVMeSSD Temp1/2 –
Shows the tempera-
tures of all NVMe M.2 drives.
M.2 Solid State Drives
Up to two M.2 solid state drives (SSDs) can be installed in socket J2 and J3 (see Section 1.5).
•
M.2 Interface: 2 PCI-E 3.0 x4
•
M.2 Form Factor: 2280/22110
•
M.2 Key: M-Key
Installing an M.2 SSD
Caution:
Use industry-standard anti-static equipment, such as gloves or wrist strap, and
follow precautions to avoid damage caused by ESD.
Locate the socket J2 and J3 on the motherboard.
There is a plastic standoff in one of the
SRW holes. If it is the correct hole for your M.2 SSD, you can slide the SSD into the socket,
and secure it by pushing the plug into the standoff. If not, you must move the plastic standoff.
Standoff Plug
Figure 3-9. Inserting the Standoff Plug
(
Note:
Your card looks different, but the standoff functions the same.)
