Supermicro SuperServer 1019S-M2, Руководство пользователя

Страница: 5 / 64

9 8
SuperServer 1019S-M2 User's Manual Chapter 1: Introduction
Chapter 1
Introduction
1.1 Overview
This chapter provides a brief outline of the functions and features of the 1019S-M2. The
1019S-M2 is based on the X11SSZ-QF motherboard and the SC514-407C chassis.
In additon to the motherboard and chassis, several important parts that are included with the
system are listed below.
1.2 Unpacking the System
Inspect the box the SuperServer 1019S-M2 was shipped in and note if it was damaged in
any way. If any equipment appears damaged, please file a damage claim with the carrier
who delivered it.
Decide on a suitable location for the rack unit that will hold the server. It should be situated
in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and
electromagnetic fields are generated. It will also require a grounded AC power outlet nearby.
Be sure to read the precautions and considerations noted in Appendix B.
Main Parts List
Description Part Number Quantity
Heatsink (passive) SNK-P0046P 1
Cooling Fans FAN-0156L4 4
Bracket for Two Fixed 2.5" Internal Hard Drives MCP-220-51401-0N 1
Riser Card RSC-RR1U-E16 1
Set of Outer Rack Rails MCP-290-00102-0N 1
Set of Inner Rack Rails MCP-290-00108-0N 1
1.3 System Specifications
The following table provides you with an overview of the main features and specifications of
the 1019S-M2. Please refer to Appendix C for additional specifications.
System Specifications
Motherboard
X11SSZ-QF
Chassis
SC514-407C
CPU
Intel
®
6th Gen Core i7/i5/i3, Pentium and Celeron processors
Socket Type
LGA 1151 (H4)
Memory
Four DIMM slots to support up to 64 GB of 72-bit unbuffered non-ECC DDR4-2133 MHz SDRAM
Chipset
Q170 chipset
Expansion Slots
One PCI Express 3.0 x4 in x8 slot (PCH Slot 4)
One PCI Express 3.0 x16 (CPU Slot 6) with riser card installed
One PCI Express 3.0 x4 in x8 slot (PCH Slot 7)
Hard Drives
Two fixed 2.5" internal (non-hot-swap) SATA hard drives
Power
Single 400W power supply (a redundant power supply is optional)
Form Factor
1U rackmount
Dimensions
(WxHxD) 17.2 x 1.7 x 16.9 in. (437 x 43 x 429 mm)