26
Chapter 3: Installation and Setup
Removing a Blade Unit from the Enclosure
A blade can be removed from the enclosure while other blades continue to operate.
Note:
When a blade is removed for a length of time, cover the slot with a dummy to ensure
proper airflow in the enclosure.
Removing a Blade Unit from the Enclosure
1.
Power down the blade unit.
2. Pull open the latch lever and use it to
pull the blade from the enclosure.
Figure 3-1. Blade Latch Lever
3.4 Installing or Removing the Blade Unit
Installing a Blade Unit into the Enclosure
1.
Pull the latch lever out, and push the blade into its bay.
Caution
: Insert the blade
carefully so the rear connectors are not damaged.
2.
As the blade is seated in the enclosure, push the lever into its locked position.
Latch Lever
