Chapter 2: Server Installation
21
Guidelines Regarding Mixing DIMMs
•
Populating slots with a pair of DIMM modules of the same type and size results in inter-
leaved memory, which improves memory performance.
•
Use memory modules of the same type and speed, as mixing is not allowed.
•
x4 and x8 DIMMs can be mixed in the same channel.
•
Mixing of LRDIMMs and RDIMMs is not allowed in the same channel, across different
channels, and across different sockets.
DIMM Construction
•
RDIMM (
non-3DS
) Raw Cards: A/B (2Rx4), C (1Rx4), D (1Rx8), E (2Rx8)
•
LRDIMM (
non-3DS
) Raw Cards: D/E (4Rx4)
Memory Population Sequence
Blue slots versus black slots:
Install the first DIMM in the blue memory slot, which is the
first of a memory channel. Then, if using two DIMMs per channel, install the second DIMM
in the black slot.
The following memory population sequence table was created based on guidelines provided
by Intel to support Supermicro motherboards. The diagram is for illustrative purposes; your
motherboard may look different.
DIMMA1 DIMMA2
DIMMD2 DIMMD1 DIMME1 DIMMF1
DIMMB1
DIMMC1
