Supermicro SSE-G2252, Руководство пользователя

Страница: 681 / 1401

Chapter 20: System Management Commands
Event Logging
– 689 –
logging command
This command controls the logging of commands entered in the CLI. Use
the no form to restore the default setting.
S
YNTAX
[ no ] logging command
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
This logging command controls the logging of command entered through
the CLI commands to temporary system RAM (i.e., memory flushed on
power reset) and flash memory (i.e., permanent memory).
E
XAMPLE
Console(config)#logging facility 19
Console(config)#
logging facility
This command sets the facility type for remote logging of syslog messages.
Use the no form to return the type to the default.
S
YNTAX
logging facility type
no logging facility
type - A number that indicates the facility used by the syslog server
to dispatch log messages to an appropriate service. (Range: 16-23)
D
EFAULT
S
ETTING
23
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
The command specifies the facility type tag sent in syslog messages. (See
RFC 3164.) This type has no effect on the kind of messages reported by
the switch. However, it may be used by the syslog server to sort messages
or to store messages in the corresponding database.
E
XAMPLE
Console(config)#logging facility 19
Console(config)#