Supermicro SSE-G2252, Руководство пользователя, Страница: 664 / 1401

Chapter 20: System Management Commands
File Management
– 672 –
S
YNTAX
dir { boot-rom: | config: | opcode: } [ filename ]}
boot-rom - Boot ROM (or diagnostic) image file.
config - Switch configuration file.
opcode - Run-time operation code image file.
filename - Name of configuration file or code image. If this file
exists but contains errors, information on this file cannot be shown.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
•
If you enter the command dir without any parameters, the system
displays all files.
File information is shown below:
E
XAMPLE
The following example shows how to display all file information:
Console#dir
File Name Type Startup Modify Time Size(bytes)
-------------------------- -------------- ------- ------------------- -------
---
Unit 1:
SSE-G2252P_V1.0.14.0.bix OpCode Y 1970-01-01 00:00:00 8559848
Factory_Default_Config.cfg Config N 2014-05-08 08:58:44 455
startup1.cfg Config Y 2014-05-08 08:59:03 1588
----------------------------------------------------------------------------
-
Free space for compressed user config files: 1413120
Console#
whichboot
This command displays which files were booted when the system powered
up.
Table 20-7: File Directory Information
Column Heading Description
File Name The name of the file.
File Type File types: Boot-Rom, Operation Code, and Config file.
Startup Shows if this file is used when the system is started.
Create Time The date and time the file was created.
Size The length of the file in bytes.