Supermicro SSE-G2252, Руководство пользователя

Страница: 65 / 1401

Chapter 4: Basic Management Tasks
Displaying Hardware/Software Versions
– 67 –
D
ISPLAYING
H
ARDWARE
/S
OFTWARE
V
ERSIONS
Use the System > Switch page to display hardware/firmware version
numbers for the main board and management software, as well as the
power status of the system.
CLI R
EFERENCES
•
“System Management Commands” on page 653
P
ARAMETERS
The following parameters are displayed:
Main Board Information
•
Serial Number – The serial number of the switch.
•
Number of Ports – Number of built-in ports.
•
Hardware Version – Hardware version of the main board.
•
Main Power Status – Displays the status of the internal power supply.
Management Software Information
•
Role – Shows that this switch is operating as Master or Slave.
•
EPLD Version – Version number of EEPROM Programmable Logic
Device.
•
Loader Version – Version number of loader code.
•
Diagnostics Code Version – Version of Power-On Self-Test (POST)
and boot code.
•
Operation Code Version – Version number of runtime code.
•
Thermal Detector – The switch monitors the temperature registered
by the PHY ICs.
•
Temperature – The highest reported temperature on the board.
W
EB
I
NTERFACE
To view hardware and software version information.
1.
Click System, then Switch.