Supermicro SSE-G2252, Руководство пользователя

Страница: 544 / 1401

Chapter 15: Multicast Filtering
MLD Snooping (Snooping and Query for IPv6)
– 551 –
Figure 15-24: Showing Static Interfaces Attached an IPv6 Multicast Router
To show all the interfaces attached to a multicast router:
1.
Click Multicast, MLD Snooping, Multicast Router.
2.
Select Current Multicast Router from the Action list.
3.
Select the VLAN for which to display this information. Ports in the
selected VLAN which are attached to a neighboring multicast router/
switch are displayed.
Figure 15-25: Showing Current Interfaces Attached an IPv6 Multicast Rout-
er
A
SSIGNING
I
NTERFACES TO
IP
V
6
M
ULTICAST
S
ERVICES
Use the Multicast > MLD Snooping > MLD Member (Add Static Member)
page to statically assign an IPv6 multicast service to an interface.
Multicast filtering can be dynamically configured using MLD snooping and
query messages (see “Configuring MLD Snooping and Query Parameters”
on page 547 ). However, for certain applications that require tighter control,
it may be necessary to statically configure a multicast service on the
switch. First add all the ports attached to participating hosts to a common
VLAN, and then assign the multicast service to that VLAN group.
CLI R
EFERENCES
•
“ipv6 mld snooping vlan static” on page 1192
•
“clear ipv6 mld snooping groups dynamic” on page 1193
C
OMMAND
U
SAGE
•
Static multicast addresses are never aged out.