Supermicro SSE-G2252, Руководство пользователя

Страница: 307 / 1401

Chapter 13: Security Measures
Access Control Lists
– 314 –
•
Source Prefix-Length – A decimal value indicating how many
contiguous bits (from the left) of the address comprise the prefix (i.e.,
the network portion of the address). (Range: 0-128 bits)
•
Time Range – Name of a time range.
W
EB
I
NTERFACE
To add rules to a Standard IPv6 ACL:
1.
Click Security, ACL.
2.
Select Configure ACL from the Step list.
3.
Select Add Rule from the Action list.
4.
Select IPv6 Standard from the Type list.
5.
Select the name of an ACL from the Name list.
6.
Specify the action (i.e., Permit or Deny).
7.
Select the source address type (Any, Host, or IPv6-prefix).
8.
If you select “Host,” enter a specific address. If you select “IPv6-prefix,”
enter a subnet address and the prefix length.
9.
Click Apply.
Figure 13-44: Configuring a Standard IPv6 ACL
C
ONFIGURING AN
E
XTENDED
IP
V
6 ACL
Use the Security > ACL (Configure ACL - Add Rule - IPv6 Extended) page
to configure an Extended IPv6 ACL.
CLI R
EFERENCES
• “permit, deny (Extended IPv6 ACL)” on page 906