Supermicro SSE-G2252, Руководство пользователя, Страница: 246 / 1401

Chapter 11: Quality of Service
Attaching a Policy Map to a Port
– 252 –
1.
Click Traffic, DiffServ.
2.
Select Configure Policy from the Step list.
3.
Select Show Rule from the Action list.
Figure 11-8: Showing the Rules for a Policy Map
A
TTACHING A
P
OLICY
M
AP TO A
P
ORT
Use the Traffic > DiffServ (Configure Interface) page to bind a policy map
to an ingress port.
CLI R
EFERENCES
•
“Quality of Service Commands” on page 1133
C
OMMAND
U
SAGE
• First define a class map, define a policy map, and then bind the service
policy to the required interface.
• Only one policy map can be bound to an interface.
• The switch does not allow a policy map to be bound to an interface for
egress traffic.
P
ARAMETERS
These parameters are displayed:
•
Port – Specifies a port.
•
Ingress – Applies the selected rule to ingress traffic.
W
EB
I
NTERFACE
To bind a policy map to a port:
1.
Click Traffic, DiffServ.
2.
Select Configure Interface from the Step list.