Supermicro SC946ED-R2KJBOD, Руководство пользователя, Страница: 50 / 76

SC946ED Chassis Manual
4-12
4-9 Power Supply
The SC946ED chassis features redundant 1000W (N+1) 96% efficient Digital Tita -
nium Level power supplies. These power supplies are auto-switching capable. This
enables them to automatically sense and operate at a 100v to 240v input voltage.
An amber light will be illuminated on the power supply when the power is off. An
illuminated green light indicates that the power supply is operating.
Redundant power supplies are hot-swappable, and can be changed without pow-
ering down the system. New units can be ordered directly from Supermicro (see
contact information in the Preface).
Changing the Power Supply
1. Remove the power cord from the rear of the power supply that you wish to
remove from the chassis.
2. Press the release tab and pull the power supply out of the chassis using the
handle provided.
3. Replace the failed power module with another of the same model.
4. Push the new power supply module into the power bay until it clicks into the
locked position.
5. Plug the AC power cord into the rear of the module.
Figure 4-14. Installing the Power Supply
Release Tab