Supermicro MicroBlade MBI-6119M-C2, Руководство пользователя

Страница: 63 / 87

MBI-6119M-C2 MicroBlade Modules User’s Manual
5-12
Change Settings
This feature specifies the base I/O port address and the Interrupt Request
address of a serial port specified by the user. Select Auto to allow the BIOS
to automatically assign the base I/O and IRQ address.
The options for Serial Port 1 are
Auto , (IO=3F8h; IRQ=4), (IO=3F8h;
IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12),
(IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5, 6, 7,
9, 10, 11, 12).
 Serial Port 2
Configuration
This sub-menu allows the user the configure settings of Serial Port 1.
Serial Port
Select Enabled to enable the a selected onboard serial port. The options
are
Enabled and Disabled.
Device Settings This item displays the status of a serial part specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request
address of a serial port specified by the user. Select Auto to allow the BIOS
to automatically assign the base I/O and IRQ address.
The options for Serial Port 2 are
Auto , (IO=2F8h; IRQ=3), (IO=3F8h;
IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12),
(IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5, 6, 7,
9, 10, 11, 12).
Serial Port 2 Attribute
Use this feature to select the serial port 2 mode. Options include SOL and
COM.
Table 5-7. Serial Port Console Redirection Sub-menu
Menu Option Description
COM1 Console Redirection
Select Enabled to enable console redirection support for the COM1 serial
port. The options are Enabled and
Disabled .
SOL Console Redirection
Select Enabled to enable console redirection support for SOL. The options
are
Enabled and Disabled.
 Console Redirection
Settings (Both COM1 and
SOL)
This feature allows the user to specify how the host computer will
exchange data with the client computer, which is the remote computer
used by the user.
Terminal Type
This feature allows the user to select the target terminal emulation type for
Console Redirection. Select VT100 to use the ASCII Character set. Select
VT100+ to add color and function key support. Select ANSI to use the
Extended ASCII Character Set. Select VT-UTF8 to use UTF8 encoding to
map Unicode characters into one or more bytes. The options are ANSI,
VT100,
VT100+ , and VT-UTF8.
Bits Per second
Use this feature to set the transmission speed for a serial port used in
Console Redirection. Make sure that the same speed is used in the host
computer and the client computer. A lower transmission speed may be
required for long and busy lines. The options are 9600, 19200, 38400,
57600 and
115200 (bits per second).
Data Bits
Use this feature to set the data transmission size for Console Redirection.
The options are 7 Bits and
8 Bits .
Table 5-6. SuperIO Device Configuration Sub-menu (Continued)
Menu Option Description