Supermicro MicroBlade MBI-6119M-C2, Руководство пользователя

Страница: 62 / 87

5-11
Chapter 5: BIOS
Max Link Speed
Use this feature to configure PEG 0:1:1 Max Speed. Options include Auto ,
Gen1, Gen2 and Gen3.
PEG1 Slot
Power Limit
Value Use this number field to set the upper limit on power supplied by the slot.
The power limit (in Watts) is calculated by multiplying this value by the
slot’s Power Limit Scale. Values range from 0-255 with a default of
75 .
PEG1 Slot
Power Limit
Scale
Use this feature to select the scale used for the Slot Power Limit Value.
Options include
1.0x , 0.1xm, 0.01x and 0.001x.
PEG1 Physical
Slot Number
This feature sets the physical slot number attached to this port. The
number has to be globally unique with the chassis. Values in this field are
between 0 and 8191. Default is
2 .
Program PCIe
ASPM After OPROM
Use this feature to enable/disable the Program PCIe ASPM after OPROM.
When
Enabled , the PCIe ASPM will be programmed after OPROM. If
Disabled, the PCIe ASPM will be programmed before OPROM.
VT-d Use this feature to Enable /Disable VT-d capability for your system.
GNA Device (B0:D8:F0) Use this feature to Enable /Disable the SA GNA device.
X2APIC Opt Out Use this feature to Enable /Disable the X2APIC_OPT_OUT bit..
 PCH-IO Configuration This sub-menu allows you to configure PCH-IO parameters.
PCIe PLL SSC setting This static setting shows the PCI-E PLL SCC setting.
DMI Link ASPM
Control This feature is used to control the Active State Power Management of the
DMI Link. Options include Disabled, L0s, L1, L0sL1 and
Auto .
Peer Memory Write
Enable
This feature allows you to Disable /Enable Peer Memory Write.
M.2-H_1 ASPM
Support This feature allows you to set the M.2-H_1 ASPM settings. Options include
Disabled, L0s, L1, L0sL1 and
Auto .
M.2-H_1 Substates
This feature allows you to set PCI-E L1 substates settings. Options include
Disabled,
L1.1 and L1.1 & L1.2 .
M.2-H_1 PCIe
Speed This feature configures the PCI-E speed. Options include Auto , Gen1,
Gen2 and Gen3.
Table 5-6. SuperIO Device Configuration Sub-menu
Menu Option Description
Super IO Chip
This static display shows the name of the Super IO chip installed for your
system.
 Serial Port 1
Configuration
This sub-menu allows the user the configure settings of Serial Port 1.
Serial Port 1
Select Enabled to enable the a selected onboard serial port. The options
are
Enabled and Disabled.
Device Settings This item displays the status of a serial part specified by the user.
Table 5-5. Chipset Configuration Sub-menu (Continued)
Menu Option Description