Supermicro MicroBlade MBI-6119G-C2, Руководство пользователя

Страница: 67 / 88

5-15
Chapter 5: BIOS
Terminal Type
This feature allows the user to select the target terminal emulation type
for Console Redirection. Select VT100 to use the ASCII character set.
Select VT100+ to add color and function key support. Select ANSI to
use the extended ASCII character set. Select VT-UTF8 to use UTF8
encoding to map Unicode characters into one or more bytes. The
options are ANSI, VT100, VT100+, and
VT-UTF8 .
Bits Per Second
This item sets the transmission speed for a serial port used in Console
Redirection. Make sure that the same speed is used in the host
computer and the client computer. A lower transmission speed may be
required for long and busy lines. The options are 9600, 19200, 57600,
and
115200 (bits per second).
Flow Control
This feature allows the user to set the flow control for Console
Redirection to prevent data loss caused by buffer overflow. Send a
"Stop" signal to stop sending data when the receiving buffer is full.
Send a "Start" signal to start sending data when the receiving buffer is
empty. The options are
None, Hardware RTS/CTS, and Software Xon/
Xoff.
Data Bits, Parity, Stop
Bits
The status of each item above is static displayed.
Table 5-11. ACPI Settings Sub-menu
Menu Option Description
High Precision Event Timer
Select Enabled to activate the High Performance Event Timer (HPET) that
produces periodic interrupts at a much higher frequency than a Real-time
Clock (RTC) does in synchronizing multimedia streams, providing smooth
playback and reducing the dependency on other timestamp calculation
devices, such as an x86 RDTSC Instruction embedded in the CPU. The
High Performance Event Timer is used to replace the 8254 Programmable
Interval Timer. The options are
Enabled and Disabled.
WHEA Support
This feature Enables the Windows Hardware Error Architecture (WHEA)
support for the Windows 2008 (or a later vision) operating system. The
options are
Enabled and Disabled.
Table 5-12. iSCSI Configuration Sub-menu
Menu Option Description
iSCSI Initiator Name
This field specifies the worldwide unique name of the iSCSI initiator. Only
an IQN format is accepted. Range is from 4 to 255.
Add an Attempt Use this sub-menu for options to add an attempt.
Delete Attempt Use this sub-menu for options to delete attempts.
Change Attempt Order Use this sub-menu to change attempt order.
Table 5-10. Serial Port Console Redirection Sub-menu (Continued)
Menu Option Description