FatTwin AS -F1114S-FT User's Manual
30
Figure 3-7. Assembling the PCIe Slot Bracket and Riser Card
Assembling the PCIe Slot Bracket Assembly
Each node supports two expansion cards in front of the node. Each expansion card must be
plugged into a riser card, which in turn plugs into the motherboard.
Assembling the PCIe Slot Bracket Assembly
1. Remove the node from the chassis and remove the cover from the node as described
previously in this section.
2. Open the PCIe slot clip and remove the PCIe slot shield. (See the illustration on the
previous page)
3. Remove the tool-less PCIe slot bracket.
4. Lift the PCIe slot bracket out of the node.
Expansion Card
PCIe Slot Bracket
Card Mounting
Screws
