To Remove the BPN-ADP-2M2-1UB:
1. Power down the system and remove the power cord from the rear of the power supply.
2. Use industry-standard anti-static equipment (such as gloves or wrist strap) and follow the precautions on page 3-1 to avoid
damage caused by ESD.
3. Remove the chassis from the rack
4. Take off cover
5. Remove any DIMMs obstructing access to the BPN-ADP-2M2-1UB
7. Remove the two screws from the left hand side of the chassis that secure the BPN-ADP-2M2-1UB to the chassis
8. Pull the card out of the socket by both notched edges (front and back) of the card. Be careful not to exert any force on any M.2
SSD
’s already installed on the card.
