A+ Server ASG -1014S-ACR12N4H User's Manual
37
Figure 3-3. PCIe Expansion Cards
PCI Expansion Card Installation
The chassis supports two full height and one low profile PCIe expansion cards.
Installing an Expansion Card
1. Power down the system as described in Section 3.1 and remove the rear cover.
2. Remove the riser card bracket from the system.
3. Install the add-on card in your preferred slot on the riser bracket and secure with the
provided screws.
4. Insert the riser card bracket into the motherboard expansion slot while aligning the riser
card bracket with the rear of the chassis.
5. Secure the bracket with the provided screws.
Low Profile Card
Two Full Height,
Half Length Cards
Riser Card Bracket
