A+ Server AS -1014S-WTRT User's Manual
34
DIMM Removal
Press both release tabs on the ends of the DIMM module to unlock it. Once the DIMM module
is loosened, remove it from the memory slot.
Caution:
Exercise extreme caution when installing or removing memory modules to prevent
damage to the DIMMs or slots.
Receptive
Point
DIMM Installation
1. Insert the desired number of DIMMs into
the memory slots, there is no specific
sequence or order required
.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with
the receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on
the ends of the slot.
5. Press both ends of the module straight
down into the slot until the module
snaps into place.
6. Press the release tabs to the lock
positions to secure the DIMM module
into the slot.
Release Tabs
Notches
Press both ends
straight down into
the memory slot.
Key
