1
DECORATIVE FACADE KITS
P/N 900143-01
Rev. A, 08/2016
HEARTH PRODUCTS
KITS AND ACCESSORIES
KIT CONTENTS
1 ea. Facade Assembly
8 ea. Facing Screws, 1/4”-20 x 1”
8 ea. Decorative Caps
1 ea. Instruction Sheet
INSTALLATION INSTRUCTIONS FOR INSTALLING FACADE KITS
FOR USE WITH FIREPLACES LISTED IN TABLE 1
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
GENERAL INFORMATION
These facade kits provide a decorative finished look to the fireplace.
If you encounter any problems, need clarification of these instructions or
are not qualified to properly install this kit, contact your local distributor
or dealer.
Read this instruction sheet in its entirety before beginning.
ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND
OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO
THESE INSTRUCTIONS.
SHUT DOWN THE APPLIANCE AND ALLOW IT TO COMPLETELY COOL
BEFORE PROCEEDING.
INSTALLATION INSTRUCTIONS
Installing the decorative facing
(see
Figure 1
):
Step 1.
Fix the decorative facade (3) on the fireplace front (2) using 8
facing screws.
Step 2.
Cover each of the 16 facing screws (5) with a decorative cap (4).
Imprimé aux États-Unis © 2013 Innovative Hearth Products
P/N 900143-01 Rev. A 08/2016
IHP reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor
for fireplace code information.
Innovative Hearth Products
1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210
Figure 1
*
* Decorative overlays for
hammered facing only
Rivnut (1)
Fireplace
Front (2)
Decorative
Facade (3)
Decorative
Cap (4)
Facing
Screw (5)
2
3
1
4
5
HARDWARE DETAIL
FACADE KITS
Cat. No.
Model
Description
F2853
WCT6940-FAC-BLK Black Facade, WCT6920WS *
F2854
WCT6940-FAC-HMRD Hammered Steel Facade, WCT6920WS *
BTCEFBK
BTCEFBK
Black Facade, WCT6820WS, BIS Tradition CE
BTCEFMC
BTCEFMC
Hammered Steel Facade, WCT6820WS,
BIS Tradition CE
BTFBK
BTFBK
Black Facade, WCT6840WS, BIS
®
Tradition
BTFMC
BTFMC
Hammered Steel Facade, WCT6840WS,
BIS Tradition
Table 1
* Compatible with catalytic models only.
NOTE: Catalytic models will require removal
of the air-bypass knob prior to installation.
