Superior Electric SLO-SYN SS2000MD4M-O, Руководство по установке

Страница: 6 / 34

Page 4 SS2000MD4M-O
This manual is an installation and operating guide to the SLO-SYN
SS2000MD4M-O Drive/Oscillator. Section 1 gives an overview of its fea-
tures. Section 2 describes the steps necessary to place the MD4M-O into
operation. General wiring guidelines as well as the physical mounting of the
unit and connec tions to the drive portion are covered in Section 3.
Complete specifications, listed in Sec tion 4, provide easily referenced infor-
mation concerning electrical, mechanical and environmental specifications.
The procedure for setting the motor current level and connection of Oscillator
I/O are also covered in this section.
Torque versus speed characteristics with all appropriate SLO-SYN Stepper
Motors are given in Section 5. Section 6, Troubleshooting, gives procedures
to follow if the Drive/Oscillator fails to operate properly.
Appendix A provides procedures for troubleshooting electrical interference
problems.
1.2 - PRODUCT FEATURES
The SLO-SYN SS2000MD4M-O Drive/Oscillator combines a bipolar,
two-phase PWM drive which uses hybrid power devices and a con-
trol/oscillator in one compact package. Micro-stepping at 1/32 step resolu-
tion (6400 pulses/revolution) is used to ensure smooth low speed opera-
tion. The maximum running speed is 3,000 rpm. Features include:
•
Switch selectable motor current levels of 1.0 through 3.5 amperes
•
Microprocessor-based Digital Oscillator for accurate speed control
•
Built-in Potentiometers for Accel, Decel, Low Speed, and Run Speed
•
Full short circuit protection (phase-to-phase and phase-to-ground)
•
Undervoltage and transient overvoltage protection
•
Efficient thermal design
•
Windings Off capability
•
User selectable Automatic Current Reduction at standstill
•
Compact size
•
Sturdy all-aluminum mounting base
•
Run Speed Control from Built-in Potentiometer or External Voltage Input