SuperFlow SF-1020I, Руководство оператора

Страница: 20 / 80

16
5.0 Operation
5.1.2 Setting the Test Pressure
If the 40002 Servo_Mode register has been set to T est Pressure mode . The operator should verify and if
necessary set the test pressure prior to testing.
Test Pressure Register
Register Function Data Type
Read/
Write Value Units Scale
40035-36 TestPressureSetFloat Float-32 R/W Floating point value for test pressure setpoint InH
2
0 None
Register 40035-36 TestPressureSetFloat provides the status (state) that the flowbench test pressure
is currently in when read. It also allows for the ability to change (set) states when this register receives
commands. The register can be set to the desired test pressure in the unit of measurement (InH
2
O).
Example:
25 = A test pressure of 25" H
2
0
5.1.3 Setting the Flow Rate
If the
40002 Servo_Mode
register has been set to
Flow Rate
mode . The operator should verify and set the
flow rate prior to testing.
Flow Rate Register
Register Function Data Type
Read/
Write Value Units Scale
40037-38 FlowRateSetFloat Float-32 R/W Floating point value for flow rate setpoint CFM None
Register 40037-38 FlowRateSetFloat provides the status (state) that the flowbench flow rate is currently in
when read. It also allows for the ability to change (set) states when this register receives commands. The
register can be set to the desired flow rate in the unit of measurement (CFM).
Example:
100
= A flow rate of 100 cfm