Superabrasive LAVINA V16E, Руководство пользователя

Страница: 15 / 28

Superabrasive Owner’s manual original language – Lavina
®
V16E 01/2021
15
7.3 FILTER CHANGE/CLEAN
Lavina
®
V16E doesn’t have any filter cleaning system but
it’s equipped with hydrophobic filter that can be washed. In order
to clean the filter you must take it off the vacuum’s head cover and
clean it manually.
WARNING:
1. Turn off the engine and wait for the fan impeller to
completely stop before opening the machine to change
filters.
To dismount the filter (fig. 7.3):

Open the vacuum’s head cover;

Unscrew the wing nut and remove the protective sleeve.

Unscrew the nut and take out the filter;

Replace or clean the filter and mount it back to the
vacuum’s head cover;
IMPORTANT:
The vacuum is equipped with protective sleeve for the filter. Use it when working on wet in
order to keep the filter out from direct contact with water or slurry (fig. 7.3.1). The sleeve is washable
and we recommend cleaning it after every job. Make sure to remove the sleeve as working in dry
because it will get clogged fast and the dust extractor won’t perform well as expected. We
recommend using dust bag when working in dry (check the accessories page).
Figure 7.3.1
Figure 7.3