Superabrasive LAVINA LP36 Series, Руководство пользователя

Страница: 7 / 34

Superabrasive Owner’s manual original language – Lavina
®
LP36 01/2020
7
2. GENERAL INFORMATION
This owner’s manual is intended for the operator of the Lavina
®
LP36 machine, the servicing
technician as well as for anyone involved with operating or servicing the machine. We recommend
that you read the instructions very carefully and follow them strictly. The manual includes
information about assembling, using, handling, adjusting and maintaining your Lavina
®
LP36G power
trowel.
2.1 MANUFACTURER
Superabrasive was founded in 1987, as a manufacturer of high quality diamond tools for the
stone and concrete industry. Today, Superabrasive is one of the world’s leading companies in the
production of diamond tools and floor grinding machinery. At Superabrasive, we strive to deliver the
very best solutions to our customers, and enable them to work more efficiently.
2.2 GENERAL DESCRIPTION
Lavina® LP36G ride-on power trowel is designed for the floating and finishing as well as
grinding and polishing of concrete slabs. Take a notice of all the major components at fig. 3 like the
engine , blades, air cleaner, fuel system, fuel shut-off valve, ignition switch, etc. Ensure engine and
gearbox lubricant levels are within proper operating range.
Read all the safety instructions carefully. Safety instructions will be found throughout this
manual and on the machine. Keep all safety information in god, readable condition. Operators should
be well trained on the operation and maintenance of the trowel.
Before using your trowel, test it on a flat, watered-down section of finished concrete. This trial
test run will increase your confidence in using the trowel, and in the same time, it will familiarize you
with the trowel’s controls and indicators.
ENGINE
This trowel is equipped with Kawasaki FX1000V gasoline engine, V-twin big block, air cooled,
conversed to propane with 35HP. Refer to the engine owner’s manual for specific instructions
regarding engine operation.
BLADES AND FLOATING PANS
The blades of the trowel finish the concrete as they are swirled around the surface. LP36G is
equipped with four finish (6 inches wide) blades per rotor equally spaced in a radial pattern and
attached to a vertical rotating shaft by means of a spider assembly. In order to use tooling for
polishing and grinding, two 36-inch floating pans are mounted on the blades. Each pan has four
13.2’’ Trowel Shine Tool Holders (metal plates with quick-change attachment). Each trowel shine
holder can be equipped with all of Superabrasive’s tools for grinding and polishing that use quick-
change connection.
HELICAL GEARBOXES
LP36G is designed with two separate helical gearbox assemblies.