Superabrasive Lavina Elite L20EU, Руководство пользователя

Страница: 13 / 42

Superabrasive User Manual Original Language Lavina
® 20EU
6/2020
13
Figure 4.7
4.3 ADJUSTING AND MOUNTING TOOLS
Lavina® 20EU uses tool holder A63. With this new holder every one of our tools uses the “Quickchange” connection. To
change the tools you need first to unlock the butterfly (fig 4.6 in blue) by using the key we provide you (you can see it in the
pictures fig. 4.7) remove the security plate (fig 4.6 in red) then load the tools you want and insert the security plate again so
the tools cannot go backwards, rotate and lock the butterfly (as shown in fig.4.7). As you can see in fig. 4.6, for some of the
new tools you need to remove the security plate as they don’t need locking system at all but for the others always make sure
that the tools are securely locked.
In Lavina 20EU the holder is initially mounted with 3 buffers.
Mount the tools only after ensuring that there is enough diamond bond material left. Be sure that the plates are always
clean before mounting.
WARNING: Always secure the Quick Change tools with the butterfly (Fig.4.6 in blue), lock with the tool holder key
(Fig.4.7) and make sure that the butterfly is securely locked and it holds the security plate not to fall off.
4.4 VACUUM CONNECTION
To connect a vacuum cleaner, the Lavina 20EU
is supplied with
vacuum hose Cam Lock inlet C250 /
vacuum hose diam.
2, 5 in (63mm)
(Fig.4.8). You can also dismount the Cam Lock adaptor and connect a hose with outside diam. 2in.
Figure 4.8
Figure 4.6