Superabrasive LAVINA B21-E, Руководство пользователя

Страница: 6 / 23

Superabrasive User Manual Original Language Lavina®B21-E 4/2016
6
2. SAFETY INSTRUCTION
RECOMMENDED USE
Lavina®B21-E is designed and manufactured to polish and
clean smooth surfaces. The machine is designed for dry and
humid but not wet surfaces. It is equipped with its own
vacuum cleaner
PROHIBITED USE
The machine MUST NOT be used:
For applications different from the ones stated in the General
Description chapter.
For not-suitable materials.
In environments which:
Possess risks of explosion
Possess high concentration of powders or oil substances
in the air
Possess risks of fire
Feature inclement conditions.
Possess electromagnetic radiation.
PREPARATION FOR WORK
Make sure that:
You have closed the work area, so that no person unfamiliar
with operating the machine can enter the area
The tool plate and tools are adjusted to the machine properly
There are no missing parts of the machine
The machine is in upright working position
The protection devices are working properly.
The electrical cable is free to move and follow the machine
easily. In order to keep the electrical cable from being
damaged, no vehicle should cross the zone where electrical
cables are situated.
PROTECTION DEVICES
The machine is equipped with several protection devices
including the following:
An emergency stop button
A protection skirt
These devices protect the operator and/or others persons
from potential injuries. Do not remove them. On contrary,
before using the machine, please ensure that all protection
devices are mounted and function properly.
ARREST FUNCTIONS
Functions of arresting of the machine are following:
Button to stop the motor (category 1)
Emergency button (category 1)
SAFE USE
The Lavina®B21-E is designed to eliminate all risks correlated
with its use. However, it is not possible to eliminate the risks of
an eventual accident with the machine. Unskilled or
uninstructed operator may cause correlated residual risks.
Such risks are:
Position Risks due to operator’s incorrect working position
Entangling Risks due to wearing inappropriate working clothes
Training Risks
due to lack of operational training
NOTE : In order to reduce all consequences of the above-
mentioned risks, we advise that machine operators will follow
the instructions in the manual at all times.
RESIDUAL RISKS
During the normal operating and maintenance cycles, the
operator is exposed to few residual risks, which cannot be
eliminated due to the nature of the operations.
BEFORE YOU BEGIN
Working area must be clear from any debris or objects.
A first-time operator must always read the manual and pay
attention to all safety instructions.
All electric connections and cables must be inspected for
potential damages.
Ground wire system of the power supply must be also
inspected.
Perform general daily inspections of the machine and inspect
the machine before each use.
Always inspect the safety devices:
The emergency break must be clear and working
The tool protector must be working
The machine must be clean
Never operate the machine in the rain!
Confirm that there are no missing parts especially after
transportation, repair or maintenance.
OPERATING MACHINE
When operating the Lavina®B21-E, make certain that there is
no one, but you around the machine.
Never leave the machine unattended while working.
The electrical cable must move freely and must be damage-
free.
Check if the floor, you work on, is not too uneven. If this is the
case, it may damage the machine.
AFTER WORK IS COMPLETED
Clean the machine and its surroundings properly
Unplug the machine and wind up the electrical cable
Store the machine in a safe place
THE WORK AREA
Make certain that people or vehicles do not enter the work
area.
Avoid cables and hoses being in the way.
Always check the floor for debris
PERSONAL PROTECTIVE EQUIPMENT
(PPE)
Always wear safety shoes when working with the machine.
Always wear ear protectors when working with the machine.
All personnel in the immediate work area must wear safety
glasses with side shields.