Superabrasive Lavina 25LM-X, Руководство пользователя

Страница: 8 / 41

Superabrasive User Manual Original Language Lavina® 25LM-X / Lavina® 25LM-X-HV 1/2016
3. HANDLING AND TRANSPORTATION
SPLITTING THE CARRIAGE FROM THE MAINHEAD
Unplug the motor
cable plug from the
control box and
disconnect the water
hose from the main
head by pulling it out
(Fig.3.1) (Fig.3.2).
Wind the electrical
cable on the carriage.
Release the pin sets
which attach the
head to the
carriage(Fig.3.4). Pull
out the vacuum
hoses (Fig.3.3), and
dismount the head
from the
carriage(Fig.3.5).
The head of the
LAVINA® X machine
has one bar for
support and is used as
handles for easy moving and transportation.
LIFT THE MACHINE FROM WORKING TO TOOL MOUNTING POSITION
Push the lock the handle down and swivel it to thefront (Fig.3.6.1). Pull the
handle up and ensure the head is a stable upright position, for
mounting/dismounting the tool. Ensure that the water tank is empty before
flipping the machine. Pull the head in upright position (Fig.3.6.2).
LIFTING
Lifting the machine by crane is possible with the eye bolt, which is mounted
on the carriage (see Fig. 3.7). The eye bolt and
machine construction is rated only for the
weight of the machine. Do not list any other
leads on the machine. Always use hoisting equipment rated for 300 kg or 660 lbs.
ADJUSTING THE HANDLE
The Handle on the frame is adjustable in height and allows the operator to work in a
correct and safe posture.
The unlocking is by pulling the handle ( fig.3.8)The locking is
automatically under action of the spring. Choose the upright position to move easy
the machine.
Figure 3.6.1
Figure 3.6.2
Figure 3.7
Figure 3.4
Figure 3.1
Figure 3.2
Figure 3.3
Figure 3.5
Figure 3.8
8