Superabrasive
User Manual Original Language
Lavina® 20G-X
4/2018
24
8.3 DISMOUNTING/MOUNTING THE
GUARD
You can dismount and mount the safe
guard without separating the carriage
from the main head. Put the machine in
position to change the tools. Unscrew
the four bolts M5 from the metal cover
preventing the safe guard to fall.
Dismount one of the three holders.
Dismount the safe guard.
8.4 SEPARATING THE HEAD FROM THE CARRIAGE
Please note that the propane cylinder has to be removed and stored outside before any maintenance or reparation is done.
1. Disconnect the flexible hose supplying water under the cover of the machine/Fig. 8.4.1/. All water connections in the machines
are with fittings types„Push-In “ and „Release button”.
2. Unscrew the two bolts and nuts to disconnect the vacuum connector from the carriage. /Fig. 8.4.2/.
3. Disconnect the cable of the battery/Fig. 8.4.3/.
4. Remove the lamp /on magnetic attachment/ and disconnect the cable /Fig. 8.4.4/.
5 . Unscrew the four bolts to remove the panel /Fig.8.4.5;Fig.8.4.6;Fig.8.4.7/.
6. Dismount the panel holding the tank /Fig.8.4.8;Fig.8.4.9/.
7. Disconnect the control panel carrying the throttle lever and move it to the main head /Fig.8.4.10;Fig.8.4.11;Fig.8.4.12/
Figure 8.4.1
Figure 8.4.2
Figure 8.4.3
Figure 8.4.4
Figure 8.3
Figure 8.4
