Thank you for purchasing our product.
Please read this User’s Manual before
using the product
.
Change without Notice
AUTO LENS CAMERA
User’s Manual
CONTENT TABLE
CONTENT TABLE……………………………………………………………. 2
SAFETY PRECAUTIONS…………………………………………………… 3
FCC STATEMENT…………………………………………………………….. 4
REAR PANEL………………………………………………………………… 5
FUNCTION SETUP………………………………………………………….. 6
MENU TREES………………………………….…………………………….. 7
MENU SETUP…..……………………………………………………………. 8
CAMERA SETUP………………………………………… ………................ 8
>FOCUS / ZOOM PAGE………………………………………………….. 8
>EXPOSURE PAGE ……………………………………………………… 9
>AWB PAGE.…………..………………………………………................. 10
>PICTURE PAGE ……..………………………………………………….. 11
>DAY/NIGHT PAGE …….……..……………………………………………12
REMOTE SETUP…………………………………………………………….. 13
DISPLAY SETUP ………………………….………………………………… 14
LOAD DEFAULT……………………………………………………………… 15
EXIT MENU …………………………………………………………………… 16
REMOTE CONTROLLER……….……………………………………………. 17
SPECIFICATIONS………………………………………..……..…………… 18
DIMENSION…………………………………………………………………… 19
2
1. Do not touch the imaging surface of sensor. Use soft cloth
moistened with alcohol to clean the surface if it is touched
accidentally.
2.
Ensure the supply voltage is correct as specified for the particular
variant of camera before operation.
3.
Do not expose the camera to rain, moisture or to temperature
outside the specified limit, without a suitable housing.
4.
Avoid focusing directly on the sun
5. Do not attempt to service this unit yourself unless you are
authorized to do so. Opening cover may exposure you to
dangerous voltage or other hazards. Refer all servicing to qualified
personnel only.
3
SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of insulated dangerous Voltage within the
product’s enclosure that may be sufficient magnitude
to constitute risk of electrical shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operation and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING
This device complies with Part 15 FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received including
interference that may cause undesired operation."
* Federal Communications Commission (FCC) Statement
WARNING
This Equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the ser is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
* You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void your
authority to operate the equipment.
4
FCC STATEMENT
