SUNWARD SWE20F 2019, Руководство по эксплуатации и техническому обслуживанию

Страница: 8 / 104

3
1.10 FORBID HITCHING OTHER PEOPLE
When the machine is in operation or traveling,
prohibit other people except operator staying on the
machine.
1.11 KEEP MACHINE AWAY FROM
ELECTRICITY TRANSMISSION LINE
Any part or load of machine touching electricity
transmission line will cause human death or GBH.
Prohibit machine or its load being close to electricity
transmission line, the machine should be 3 meters away
from line.
1.12 MOVE MACHINE SAFELY

Before the machine travels and swings, operator
should know the position of other people.

When machine travels or before it swings, operator
should warn other people by ringing the horn.

Operation at confined area should use signal in
swinging, and harmonize the hand signal before
machine start-up.

Before operating the machine traveling, confirm that
the operation of traveling pedal/control lever is
corresponding with the traveling direction.

Treadle the foreside of traveling pedal or push
traveling lever forward, and the machine will travel
along tension wheel. By contraries, the machine will
travel along sprocket wheel.

When machine travel on slope, place bucket as figures
show, keep bucket 200-300mm up the slope ground, if
the machine slides or becomes unstable, set the bucket
down at once.
1.13 PREVENT ACCIDENT WHILE BACKING OR
SWINGING
In order to prevent accident while backing or
swinging, the operator must follow:

Before back or swing the machine, look round and confirm nobody is around.

Ensure that other people stand out of the boom swing range.

Pay attention to that whether other people stay in work range or not. Ring horn or use other
signals to warn before moving the machine.

If the operator’s vision is blocked when the machine backs, a signalman is needed and the
signalman should always be seen.