1
The safety instructions in this chapter
only include the general safety rules
of machine. They can’t cover all the
possible dangers. If there is any
problem, please report to your superior
before operation and maintenance.
1. SAFETY RULES
1.1 SAFETY MARK
Fig 1-1 is the mark to remind of safety, when you see this
mark on the machine or in the manual book; it indicates that
the human body is in danger of injury.
1.2 SAFETY LABEL
There are various labels at various points of machine, in
these labels, various words indicate various hurt risks, such
as “DANGER”, “WARNIGN”, “CAUTION” etc
(as right figure), they mean as follows:
1)
DANGER—indicates an imminently hazardous
situation which, if not avoided, could result in
death or serious injury.
2)
WARNING—indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
3)
CAUTION—indicates potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
“DANGER”, “WARNING” safety labels
are stuck at given points of machine
within the range of possible danger.
General attentions listed on the
“CAUTION” safety label. In this manual
book, “CAUTION” also reminds of safety
instruction.
1.3 GENERAL SAFETY INSTRUCTION
Study the manual carefully and follow the safety
instructions in the labels and manual before
operating the machine.
1)
Always keep the safety labels clean. Change
any lost or damaged label with a new one. If the
labels or manual book are lost, you can contact
dealer and indicate the model of machine to
purchase a new one.
2)
Only qualified operator is permitted to operate this machine. Keep the machine in good
condition as per this manual.
Содержание SWE20F 2019
Страница 101: ...99 8 ATTACHMENT 8 1 20FNELECTRIC DRAWING...
Страница 102: ...100 8 2 20FHYDRAULIC DRAWING...