SUNWARD SWE18UF, Руководство по эксплуатации и техническому обслуживанию

Страница: 15 / 120

OPERATION & MAINTENANCE MANUAL SWE18UF
9
liquids

If accident occurs, see the doctor at once.

Any liquid penetrated in skin must be cleaned within
a few hours. Otherwise it will cause necrosis.
1.29 AVOIDING HEATING NEAR PRESSURE OIL PIPES

If heating up near pressure oil pipe, the inflammable
spray will cause severe burn to the nearby people.
Don’t carry out welding, gas protection welding, or
gas cutting near pressured oil pipe or other
flammable goods.

If welding, gas protection welding, or gas cutting
near pressure oil pipes is necessary, temporary
fireproof jacket should be put on to protect hose or
other materials.
1.30 AVOIDING HEATING PIPES CONTAINING FLAMMABLE LIQUIDS
Not permit welding inflammable liquid steel pipe or
hose. Before welding this kind of pipe or hose, clean this
pipe or hose completely with incombustible solvent.
1.31 REMOVING PAINT BEFORE WELDING OR HEATING

Prevent bringing potential poisonous gas and dust.

When paint is heated up by welding or by other
methods, it will cause poisonous gas.

Remove paint as following methods before welding
or heating up.
Rub out paint with abrasive paper or wheel, during
this work, remember to wear regulated respirator to avoid
inhaling dust.
Rub out paint with solvent or paint remover. After
rubbing out, clean paint remover with soap and water
before welding. Before welding or heating up, volatilize
the paint remover gas at least 15 minutes.

The paint removing work should be operated outdoor
or at well ventilation sites.
1.32 SAFE DISPOSAL OF LIQUIDS

All fuels, the majority of lubricants, and some
coolants are inflammable. These inflammable liquids
should be stored away from fire, do not permit
stabbing or setting storage case on fire.

Dispose of fuel carefully, stop engine before adding
fuel, prohibit smoking while adding fuel or using
flame near the machine being added fuel. Add fuel at
outdoor site.