Doc. Title
Author
Page of Pages
ST4300 OPERATION MANUAL
SE PARK
4 of 13
Concerning
Doc. No.
Rev.
Date
Features and How to set parameters
1.01
27 NOV 2016
Suntech International Ltd.
Confidential Document
1. Introduction
ST4300
The ST4300 is a vehicle tracking and controlling device. It is designed to collect location data through GPS
technology, various vehicle conditions through event lines, and interact remotely with its server by using
GPRS/HSPA technology.
In order to make the vehicle tracking system work, device should be configured and installed properly on a vehicle
whose geographical position and/or state is desired to be remotely monitored and/or controlled.
Please note that this Operation Manual is for the standard model. In case specific requirements are incorporated
into this Manual, such a manual applies only for the case.
For overall operation including installation, in addition to the ‘Device Manual’, users should refer to other
documents such as Parameter Manual, Commands Manual, Reporting Manual and so on.
2. Overview
Main function of device installed on a vehicle is to report vehicle location and status to its monitoring server at
predefined interval and to deliver command coming from the server for activating any appliance connected to the
device.
2-1. Operation modes
The device works in one of the four (4) operation modes below.
Parking(Idle) mode:
This mode is operational when ‘Ignition’ is OFF for duration longer than the pre-defined time.
-
In the parking (idle) mode, the device can get into special modes for power saving like ‘Sleep
mode’ and ‘Deep sleep mode’. These power saving modes are described in more details in the
end of this document.
Driving mode:
This mode starts when ‘Ignition’ of the vehicle is ON.
Idle mode:
The speed and movement of the vehicle are not detected.
Speeding mode:
Vehicle movement is detected and the vehicle speed exceeds the limited speed..
2-2. Reports sent by device