Website: www.sunsynk.com E-mail: [email protected]
7
Scan code for charging
If the electric vehicle owner installs the app or pays attention to WeChat public subscription, they can
look for idle charge pile through the app or WeChat Public subscription. Users can enter the EV charger
interface after the electric vehicle owner connects the charging gun, scan the QR code on the display
screen, and follow the required instructions to start charging.
Swipe card for charging
The user connects the charging gun correctly and uses the configured card to enter charging.
After the charging is finished, please scan the card for payment first and then plug out the gun, otherwise,
the card will be locked. If the card be locked, please swipe the card again to unlock the card or contact
the administrative office to handle it.
Charge status is shown as below:
3.3.2. Stop Charging
If the owner wants to stop charging when the EV charger is under processing.Can operate it through the
below methods:
1) Mobile terminal (APP or WeChat public): Click the “stop charging” button and then draw the gun.
2) Swipe the card for settlement, and draw the gun after successful deduction.
