Website: www.sunsynk.com E-mail: [email protected]
5
Instruction
Use designated cable. A non-designated cable use can cause electric shock. Be sure to use the cable
designated in this manual.
Prohibited
Do not damage cables. If you damage a cable, it can cause a fire or electric shock.
1. Do not work over or damage a cable.
2. Do not place heavy objects on a cable or pull the cable.
3. Do not place a heater near the cable, which may result in the cable overheating.
4. Do not tuck down a cable when installing in a rack.
5. When you unplug a communication cable, be sure to hold the plug and pull it.
Instruction
Connect a power cable and communication cable properly.
1. If you connect a power cable improperly, contact resistance will increase and it may damage the parts
or cause a fire.
2. Insert the connector of the communication cable all the way in. If it is connected improperly, the system
may be deactivated.
Prohibited
Do not install in a closed area. If the module/controller is installed in a closed area with no air-conditioning,
heat may build up inside the set and cause a fire.
Prohibited
Do not place the set in direct sunlight or near a heater. Doing so can cause deformation, a breakdown,
or a fire. Pay extra attention when you place the set near windows.
Prohibited
Do not install the set where excessive oil smoke, steam, moisture or dust is contained in the air. If the set
is installed in such a place, it may cause a fire or electric shock.
Instruction
1. Wear insulating gloves and protection glasses during installation and connection
If you do not follow the instructions below, it can lead to a
f
ire or electric shock
causing serious
injury or death.
Warning
