Website: www.sunsynk.com E-mail: [email protected]
7
The brackets are padded in the inside to prevent any damage caused by the metal to the battery sleeve.
There are two Phillips screws per bracket, and the holes in the mounting board are already threaded.
Each battery pack comes with two sets of leads.
In the installation process, we are only concerned with the pair that is black and red.
Place the batteries sideways into the container with the leads heading towards the PCB, with the black
leads secured out of the way.
The bracket should be placed over the batteries and secured in place by the two screws. The holes in
the metal mounting board are clearly visible.
5.2. Mounting the System
1. Install the solar panels using the L brackets provided and connect the cables to the PB 300 XL.
2. Mount the PB 300 XL onto a non-flammable wall.
Solar panels can be installed either on the roof or the ground. When selecting the location to install solar
panels, several conditions must be taken into account. We will address some technical considerations
and details that you should pay attention to before choosing where to install your solar panels.
position is not corrct
