Website: www.sunsynk.com E-mail: [email protected]
5
1. SAFETY
Be sure to read this manual thoroughly before installation.
Do not attempt to install the inverter by yourself. Installation work must be performed following national
wiring standards by authorized personnel only. Do not turn on the power until all installation work is
complete.
Always use an individual power supply line protected by a circuit breaker and operating on all wires
with a distance between contacts of at least 3mm for this unit.
The unit must be correctly grounded and the supply line must be equipped with a suitable breaker and
RCD to protect people.
The unit is not explosion-proof, so it should not be installed in an explosive atmosphere.
Never touch electrical components immediately after the power supply has been turned off since the
system can still have residual energy, so electric shock may occur. Therefore, after turning off the
power, always wait 5 minutes before touching electrical components.
This unit contains no user-serviceable parts. Always consult an authorized contractor for repairs.
WARNING !!! HIGH LIFE RISK DUE TO FIRE OR ELECTROCUTION.
The Sunsynk Parity Hybrid Inverter can only be installed by a qualified licensed electrical
contractor. This is not a DIY product.
