EA1200 FAST OPERATION MANUL
INDICATE LED
·
The Status LED indicates the communication status with PC, when flash quickly, it
stands that it received the data from PC.
·
When the Data LED light, it stands receiving data from keypad
BASE STATION
CONNECTION
·
Connect the base station with PC USB port , the Status LED will flash every half
second if connection is successful.
·
The Status LED will flash quickly after the software and base station communicate
normally.
·
Initial installation, PC will automatically remind that have found new device and
install the drive automatically.
RADIO
CHANNEL SET
·
After logging in application software, choose the new channel in the
“
channel
”
of
“
base station set
”
, then click
“
set
”
.
·
When using the multiple base station solution, the frequency channel of each base
station should be different, and it
’
s better not to set the neighboring channel
·
Only when frequency channel is interfered or communication is not good, then you
need to consider changing and resetting the channel, usually you needn
’
t.
BASE STATION
TEST
After connetion is ok, power on keypads, then do keypads testing.
Status LED
Data LED
USB Port
