S
UN
S
CAN™
SR81
Quick Setup Guide
Please note these are basic keystroke details to setting up your system. For in-depth
information, please consult your manual.
Also Note that before applying any of the following keystrokes the controller would
need to be taken out of idle mode this can be done by pushing any button (the back
light on display switches on)
Setting the Clock:
Press
“CLOCK”
button
Hour “00” blinks on display
Press
“+ -“
button to adjust hour
Press
“CLOCK”
button
Minute “00” blinks on display
Press
“+ -“
button to adjust minute
Press
“ESC“
button to save set value
Setting the Timed Heating:
Press
“SET”
button twice (2x)
“THTS” is displayed
Press
“+ “
button twice (2x)
“TH1O” is displayed (Heating period 1 on) Default 03:00, 52 Deg (Electrical
element will switch on at 03:00am if the temperature is below 52 Deg)
Press
“SET”
button
“03” (hour) blinks, use
“+ -“
button
to adjust
Press
“SET”
button
“00” (Minute) blinks, use
“+ -“
button
to adjust
Press
“SET”
button
“52.0” (Temperature) blinks, use
“+ -“
button
to adjust
Press
“ESC”
button
“TH1O” is displayed
Press
“+ “
button“TH1F” is displayed (Heating period 1 off) Default 06:00, 58 Deg