11
116083
TESTING THE SEATING SYSTEM FIT TO THE WHEELCHAIR
Check the attachment of the seating system to the wheelchair as shown in (fig. 8).
MAKE CERTAIN THE FOLLOWING HAPPENS:
A. The back hooks and seat hooks slide totally onto the knob hardware.
B. The seat tab support the rear of the seat resting on the wheelchair tubes.
C. The knobs tighten and will hold the seat and back securely.
IF THE SYSTEM DOES NOT FIT OR LINE UP ON ANY OF THE HARDWARE MAKE THE
NECESSARY INDIVIDUAL HARDWARE ADJUSTMENTS TO ENSURE A POSITIVE FIT.
W A R N I N G
Revisit all fasteners and tighten securely before using the seating system.
W A R N I N G
Do not change the seat system of your chair UNLESS you consult your authorized
supplier first.
ENSURE THE SEATING LOCKS TO THE HARDWARE Securely holding the seat front pull up
and out. Securely holding the top of the back pull up and back. Ensure the seat and back stay
solidly attached to the wheel chair as shown below.
TESTING THE SEATING SYSTEM FIT TO THE WHEELCHAIR
fig. #8
Tab
