Sunrise Internet Box Скачать руководство пользователя страница 38

Страница: 38 / 162

Page 38

Sunrise Internet Box User Manual

3.3.6

Monitor

Objective:

The Monitor menu provides a solution for monitoring network traffic. You can display
information about the bandwidth history and generate graphics for all connected
devices.

3.3.6.1 Quick View

Objective:

This menu allows you to display the bandwidth history for each connected device.

•

In the

My Sunrise Internet Box

menu, select

Monitor

Quick view

The following screen opens:

Field

Meaning

Device

List of devices.

MAC

List of MAC addresses.

Volume (MB)

Displays the amount of sent and received data in up-/downlink in
megabytes for each device.

Volume (%)

For each device, displays the transmission and reception of uplink and
downlink data expressed as a percentage of the total traffic.

To display the online usage per device, proceed as follows:

•

Select the desired time monitoring from the scroll-down list or define a specific period.

Содержание Internet Box



































































































































































Результаты поиска

Содержание Internet Box

Отзывы:

Sunrise Internet Box, Руководство пользователя, Страница: 38 / 162

Результаты поиска

Содержание Internet Box

Отзывы: