13
Sedeo Ergo Rev.1.0
EN
GLISH
4.6 Swing-away controller bracket
The joystick is mounted with a mechanism that allows the
joystick to be locked in a forward or retracted position, and
can accommodate a mid-line mount so the joystick can be
located in the center of the wheelchair.
Swing-away, (Fig. 4.16).
•
To Swing-away the joystick, push outward on the inside of
joystick.
•
Push the joystick away from the front of the armrest until it
locks into the outside swing-away position.
•
To return to forward position, push the back of the joystick,
forward until it locks into place.
•
To Swing-away the joystick to the inside, push inward on the
outside of joystick.
•
Push the joystick away from the front of the armrest until it
locks into the inside swing-away position.
•
To return to forward position, push the back of the joystick,
forward until it locks into place.
Pre-setting depth of the controller, (Fig. 4.17)
1.
Loosen (A).
2.
Slide (B) into desired position.
3.
Tighten (A).
There are 2 ways to pre-set the height of the controller.
Pre-setting height of the controller (1), (Fig. 4.18).
1.
Loosen (A).
2.
Slide (C) into desired position.
3.
Tighten (A).
Pre-setting height of the controller (2) , (Fig. 4.19)
1.
Loosen (D).
2.
Slide (B) into desired position.
3.
Tighten (D).
Fig. 4.16
Fig. 4.17
Fig. 4.18
Fig. 4.19
D
B
C
A
Содержание QUICKIE Sedeo Ergo
Страница 75: ...75 Sedeo Ergo Rev 1 0...
