12
Sedeo Ergo Rev.1.0
EN
GLISH
4.5 Preset seat depth, (Fig. 4.14)
CAUTION!
When a bigger seat depth is required ensure that the cables are
lengthened before the mechanical adjustment takes place.
Be aware. As described below, there is a different procedure for
adjusting the seat depth in case of Sedeo Ergo with an standing
function (Sedeo Ergo UP).
DANGER!
We strongly recommend that you contact your Sunrise Medical
approved service agent to adjust the seat depth, because
adjusting the seat depth will affect the centre of gravity.
4.5.1 Sedeo Ergo (Standard), (Fig. 4.14)
•
Use a 5.0 mm Allen Key, (Hex Wrench).
•
Loosen the 2 screws, (A), on the bottom of the outer seat
plate, but do not take the screws out as these prevent the
shift pieces from pulling out.
•
The back assembly can now be shifted backwards or forwards
to adjust the seat depth.
•
Tighten the screws.
4.5.2 Sedeo Ergo (UP)
•
Use a 5.0 mm Allen Key, (Hex Wrench).
•
Loosen the 2 screws on both sides (A), on the bottom of the
outer seat plate, and take the bolts out (Fig 4.14).
•
The back assembly can now be shifted backwards or forwards
to adjust the seat depth.
•
Tighten the screws.
•
In addition adjust the armrest linkage simultaneously
corresponding the marker holes (B in Fig 4.15).
DANGER!
Adjusting seat depth on a Q700 UP requires additional steps.
•
Besides the seat depth adjustment as described in 4.5.2,
the armrest linkage (fig 4.15) needs to be adjusted
simultaneously.
•
Use the corresponding markings on the seat depth in parallel
to the armrest linkage.
•
Not doing so will lead to mechanical clashes and results in
damaging the product.
A
Fig. 4.14
Fig. 4.15
B
Содержание QUICKIE Sedeo Ergo
Страница 75: ...75 Sedeo Ergo Rev 1 0...
