11
Sedeo Ergo Rev.1.0
EN
GLISH
Fig. 4.10
Fig. 4.13
Fig. 4.12
4.4 Preset Leg Rests and foot plates (Sedeo Ergo UP)
4.4.1 Pre-set lower leg length (Fig 4.10):
•
Loosen bolts and take them out (2x bottom ones) at both sides of
the foot plates. (C).
•
Put footplates in desired position.
•
Tighten bolts (2x bottom ones). (C).
Pre-set footplates individually (Fig 4.11):
They height of the footplates can be individually set by:
•
Loosen 4 bolts (A)
•
Turn screw B (fig 4.10) to adjust footplate height.
•
Tighten 4 bolts (A)
4.4.2 Depth adjustment of the knee fixation (Fig 4.12 - 4.13):
The depth of the knee-pads can be adjusted by turning the knob (D).
4.4.3 Width adjustment of the knee fixation (Fig 4.12 - 4.13):
•
Loosen bolts (E).
•
Put knee-pads in desired position.
•
Tighten bolts (E).
4.4.4 Height adjustment of the knee fixation (Fig 4.12 - 4.13):
2 ways:
Adjust position of knee fixation receiver (2 positions).
•
Loosen bolts (4x). (F).
•
Put knee fixation receiver in desired position.
•
Tighten bolts (4x). (F).
Flip around the knee-pads (2 positions). These are mounted off-
centered → 2 positions.
•
Loosen bolts (E).
•
Flip the knee pads around.
•
Tighten bolts (E).
Fig. 4.11
A
C
B
E
F
F
E
D
Содержание QUICKIE Sedeo Ergo
Страница 75: ...75 Sedeo Ergo Rev 1 0...
