19
EN
GLISH
Q700 M/M HD/F/R/UP-M/UP-F Rev.G
Fig. 5.7
1000 mm
Fig. 5.5
Fig. 5.6
5.9 (Powered) seating options
The wheelchair can be equipped by the following mechanical and/or
powered options to adjust your seating position. These options can be
operated by the user without the use of tools.
Powered adjustable seating options (Fig. 5.5 - Fig. 5.7).
How to operate these powered seating options can be found in
&
Cont
&
Seating:
1. Powered tilt function
2.
Powered seat elevator
3.
Powered backrest recline
4. Powered elevating leg rests
The wheelchair may be equipped with a feature that allows the powerchair
to be driven up to 4.5kph/3mph when the seat is elevated, this feature
is called C-Me. For guidance with user weight limits and recommended
chair configuration when using C-Me, please refer to your Sunrise Medical
authorized dealer.
Note:
User weight is restricted to a maximum of 136kg in
combination with the C-Me option.
DANGER!
•
Use of the powered adjustable seating options may influence the stability
of the wheelchair.
•
Only use the powered adjustable seating options when the wheelchair
is on a flat surface! Do Not attempt to operate any power seating option
while positioned on an incline.
•
Please stay clear of any powered actuator while the component is in
motion. Sunrise power mechanisms move over large ranges of travel. Users
should be aware of their surroundings while components are in motion.
•
While driving this seating system in the reclined, elevated, or tilted
position use caution.
•
Do Not attempt to operate any power seating option while this seating
system is in motion.
•
Do not attempt to operate the lift or tilt power seating options around children.
•
Through programming it is possible to reverse the direction of all powered
seating functions, ensure you know which direction your seat is going to
move before operating.
•
Please be aware that the lift/tilt modules present a trap hazard. Make
sure that during operation the lift/tilt modules are free from all clothing,
hands, feet and other extremities, to prevent injury.
•
Do not drive on ramps or slopes with the seating in the elevated position.
Before attempting to climb or descend a slope, return the wheelchair to a
standard seated drive position, with the backrest upright.
•
This power system is designed to automatically reduce the maximum
driving speed to a creep and/or C-Me mode when certain power seating
limits are reached. Depending on the configuration of the chair there
might be multiple creep and/or C-Me speeds.
•
Before operating your chair in creep and/or C-Me mode, read all warnings
and guidelines related to this feature. They will help in understanding how
to reduce the risk of a fall or tip-over and how to identify environmental
conditions that could affect your safety when driving while the chair is in
creep and/or C-Me speed.
1. When driving indoors or outdoors, in creep mode, it should only be
used on flat, level, and hardscape surfaces.
2.
Driving in creep mode should never be attempted on uneven terrain
like: gravel, grass, bumpy surfaces, uneven pavement, or hills.
3. NEVER raise the seat when the chair is being operated in the proximity
of any of the terrain types listed above, or on any uneven surface.
Содержание Quickie Q700 M
Страница 150: ...150 Q700 M M HD F R UP M UP F Rev G ...
Страница 151: ...151 Q700 M M HD F R UP M UP F Rev G ...
