13
Q50R REV.A
Removal of castor fork from castor arm
Fig. 6.2.3
1. Using the screwdriver, remove the plastic coloured cap from the
castor arm
2. Unscrew and remove nut (B) using the 22mm spanner from
inside the castor assembly
Tightening torque for (B) bolt is 10Nm - 15Nm.
Fig. 6.2.4
3. Remove the (C)castor fork from the castor arm
Preparation Tools used
Note!
Switch off the wheelchair via remote control
Instructions
Note!
Suitable work area required!
• Follow the illustrated instruction for removing the castor
fork from the front or rear castor arm.
• Rebuild the wheelchair in reverse order once completed.
Содержание Quickie Q50R
Страница 1: ...1 Q50R REV A 3 Quickie Q50R Service Instructions ...
Страница 30: ...30 Q50R REV A ...
Страница 31: ...31 Q50R REV A ...
Страница 32: ...33 Q50R REV A ...
