09.ZG2833PAC5C.04839
Function introduction
Important:
Read All Instructions Prior to Installation
Product Data
Product Description
The RGB+CCT Zigbee push-button coupler is a 4-channel push-button interface for simple wall/flush type box
installation. You can continue to use existing switches, irrespective of the manufacturer. It is a wireless transmitter that
communicates with Zigbee light device that supports Green Power feature. The coupler adopts AC100-240V power input
to power a built-in transmitter. This transmitter sends wireless radio signals that are used to remotely control compatible
devices.
It enables to learn and control RGB+CCT, RGBW, CCT, dimmable Zigbee light devices that supports Green Power
feature with 4 push buttons.
Compatible With
Zigbee Green Power (included in Zigbee 3.0)
RGB+CCT Zigbee Push-button Coupler
43.00 mm
4
9
.8
1 m
m
100-240VAC Power Input
4 channels push button interface
1
5
.1
5 m
m
COM
K1
K2
K3
K4
L
N
In
-
wall
Remote
Control
Made
in
China
Green Power Device
•
DO NOT install the device with power applied.
•
DO NOT expose the device to moisture.
Safety & Warnings
Wiring Diagram
Notes for the diagrams:
L
- terminal for live lead input
N
- terminal for neutral lead input
K1, K2, K3, K4
-
COM
- common
terminals for push buttons
terminal for grounding to the push buttons connected to the coupler
PUSH
Button 2
PUSH
Button 3
PUSH
Button 1
PUSH
Button 4
L
N
COM
K1
K2
K3
K4
L
N
In
-
wall
Remote
Control
Made
in
China
Green Power Device
Note: 1) Number of push buttons connected must be 4.
2) Supported switch types: 1-gang 1 way, 2-gang 1 way, 3-gang 1 way, 4-gang 1 way.
Switch Type
Transmission Range
Radio Frequency
Power Supply
Power Consumption
Number of Push Buttons
Connector Type
Wire Size
Dimensions
Operating Temperature
Working Humidity
Waterproof Grade
Warranty
RGB+CCT
10-30m (typical)
2.4GHz
100-240VAC, 50/60Hz
Less than 0.5W
4
Push-In
0.2 - 1.5mm2 (AWG28 - AWG14)
49.8x43x15.1mm
-20
℃ ~ +
45 ℃
10% ~ 95% RH non-condensing
IP20
5 years
