
09.ZG2868.04841
Function introduction
Important:
Read All Instructions Prior to Installation
Product Data
Operation
•
This device contains button lithium batteries that shall be stored and disposed properly.
• DO NOT expose the device to moisture.
Safety & Warnings
RGB CCT DIM 3 in 1 Zigbee Remote
Protocol
Operation Voltage
Transmission Frequency
Transmission Range (free field)
Dimming Range
Dimension
Protection Grade
ZigBee 3.0
6V(2*CR2032 battery)
2.4GHz
30m
0.1%-100%
137x45x13mm
IP20
Magnetic
Bracket
Front side
Bottom side
1.This ZigBee remote is a wireless transmitter that communicates with a variety of ZigBee compatible
systems. This transmitter sends wireless radio signals that are used to remotely control a compatible
system.
2.This ZigBee remote supports 4 groups for binding max. 30 lighting devices and enables to control
DIM, CCT, RGB, RGBW and RGB+CCT zigbee lighting devices.
ZigBee Clusters Supported by This Remote Are As Follows:
Input clusters:
•
Basic
•
Power Configuration
•
Identify
•
Diagnostics
Output clusters:
•
Identify
•
Group
•
Scene
•
On/off
•
Level control
•
Ota
•
Color control
Click to get the maximum
RGB saturation, press and
hold down to increase/
decrease color saturation
Press and hold down to
decrease light intensity
S1-S7, press and hold down to
save colors, click to recall the
saved colors
RGB Color wheel
LED indicator
Press and hold down to increase
light intensity
Group numbers: Click to choose
the group, press and hold down to
turn on/off corresponding group, with
indicator under each group button,
when the groups are chosen, indicators
turn on
Click to recall 6 preset
scenes one by one
6V(2*CR2032 battery)
Note:Before the first use, please remove the protective film on the battery.
All ON/OFF button
Click to turn on/off warm white,
press and hold down to adjust
warm white between 0%-100%
Click to turn on/off cool white,
press and hold down to adjust
cool white between 0%-100%
Click to recall 5 preset Kelvin one by one
•
ZigBee RGB+CCT+DIM remote based on ZigBee 3.0
•
High sensitive & high stable touch color wheel, fast & precise color control
•
Battery powered remote with low power consumption
•
Enables to pair ZigBee lighting devices through touchlink commissioning
•
Supports find and bind mode to pair with ZigBee lighting devices
•
Supports 4 groups for binding max. 30 lighting devices
•
With
6
preset
scenes, 5 preset Kelvin
,
enables to save and recall 7 scenes
•
Enables to adjust RGB color saturation
•
2.4 GHz global operation
•
Transmission range up to 30m
•
Compatible with universal ZigBee Gateway products
•
Enables to bind and control universal DIM, CCT, RGB, RGBW and RGB+CCT zigbee lighting devices