DMX512 Decoder(with Stand-Alone)
Feature
Standard DMX512 compliant control interface, enable to set the DMX address freely.
And show address Via digital numueric display.
Stand-alone mode and DMX512 decoder mode can be freely switched by buttons.
Under situation of Stand-alone mode, it can be controlled by manual buttons with its built-in programs,
instead of DMX signal.
SR-2103FA/SR-2103EA/SR-2103FA3/SR-2103FA7
Three-channel/ four-channel output selectable.
Parameter
Part No.
INPUT
OUTPUT
SR-2103FA
12-36VDC
4x5A
4x(60-180)W
CURRENT
SR-2103FA3
12-36VDC
4x0.35A
4x(4.2-12.6)W
SR-2103FA7
12-36VDC
4x0.7A
4x(8.4-25.2)W
SR-2103EA
12-36VDC
4x8A
4x(96-288)W
Wiring diagram
1)Connection Diagram for Single Unit
18.6
170.4
45.5
178.9
Product Size
SR-2103FA
Two types available(Constant Voltage, Constant Current),suitable for different LED lamps.
To work with power repeater to expand output power unlimitedly.
Power Supply
12-36VDC
L
N
AC110-230V
D
1
D
1
D
2
D
2
DMX512
Decoder
G
N
D
w
h
it
e
DMX Master
2)Connection Diagram for Multiple Units
Power Supply
12-36VDC
L
N
AC110-230V
D
1
D
1
D
2
D
2
DMX512
Decoder
G
N
D
w
h
it
e
DMX Master
D1
D1
D1
D1
D
1
D
1
D
2
D
2
DMX512
Decoder
G
N
D
w
h
it
e
D
1
D
1
D
2
D
2
DMX512
Decoder
G
N
D
w
h
it
e
Operation
Through buttons to set desired DMX512 address, 1 key is to set “hundreds” position, 2 is to set “ten” position, 3
is to set “a” bit.
“1" button
“2" button
“3" button
To open the connection of DMX512 controller, then it can work correctly.
Using instruction
SR-2103FA
SR-2103FA
SR-2103FA
SR-2103FA
Choose Channel
Press button" 2 "and button" 3" at the same time for 2 seconds, cH digital display flashes, press button”1" to choose
3 means total 3 channels, 4 means total 4 channels. Press any button for 2 seconds to confirm 3 or 4 channels outputs.
The factory preset default is 4 channels outputs.
3/4,
Compatible
with SR-2811DMX,SR-2201DMX,SR-2812,SR-2816 and any good quality DMX Master
REMARKS
constant voltage
constant current
constant current
constant voltage
